Fulla E Mount - Removable

I printed this on a Bambu A1 using a slightly modified stock 0.2mm layer height profile with 3 walls but it could be worth going up to 4 because you do lose a little rigidity when the front wall is removed. Make sure to support the underside of the mounting holes. I tried using tree supports but would probably opt for snug or normal if I were to do it again. Lastly, I may have just had a chubby usb-c power cord but i had to modify the mount just slightly upon completion.

Printed in Elegoo PLA-Pro Burgundy.

I removed the front wall and widened the slot in the volume knob opening to 31mm in order to make the Amp removable from underneath the desk without removing the whole mount. To be clear, I own the Schitt Fulla E DAC/AMP and the original mount designed for the Fulla 2 fits this perfectly.