Stem mount (Ball)

Hi, I've used this mount on Honda CBR 650 R 2024.

I hope it will fit on your motorcycle too, diameter of this mount is 19,3mm.

I've printed it from PETG and TPU.
You can use whatever you want, just make sure to print Spin from something flexible

I recommend you to use higher infill for all of the parts since there will be some pressure after you tighten it.

Make sure to print:
3x Spread
2x Spin
Rest is just 1x.

You will have to buy:
1x M6 bolt at least 70mm long, i've used 100mm.
1x nut
(use soldering iron to push nut and bolt in)

Optional:
I've used rubber in spray to make the ball more grippy.