Micron R1 Beta Umbilical Mount PG9/3 hole
Standard R1 beta cable chains mount point on the gantry, but with a zip tie tie-down point.
2
23
0
176
updated July 15, 2024
Description
PDFI needed a good way to secure the wires coming from the umbilical in to the chain.
The model is printed with standard Voron settings:
ABS/ASA
0.2mm Layer height
0.4mm Extrusion width
4 Walls
5 Bottom/Top
40% Infill
Place the model with the top of the PG9 mount point on the bed.
Tags
Model origin
The user re-uploaded this model. The user is not the original author of the model.