PS5 Digital Horizontal Stand 150 mm bed

Print the base support at 0.3mm, 10% infill, 80mm/s speed, with 2 shells. 

Recommended to add supports for base for a cleaner print. 

You can get away without using supports for most of it, but I would at least add them where it hooks at each end to strengthen the part that actually holds the PS5. 

Print the dowl at 0.2mm, 50 to 100% infill, 60mm/s speed, shell count 2.

I cut the supports in half and added holes and a dowl to work with smaller printers.