Have you ever needed a drip tray for your plant pot, and instead of doing the normal thing like running to the store or even downloading a model, decide to create your own? No? Only me?
This is a relatively simple drip tray model. It will catch the water that leaks from the pot.
I uploaded the F3D file so that you can customize it in Fusion 360 to your liking. Go to Design > Modify > Change Parameters, and then Save to Mesh to generate a STL file.
I printed this with 5% infill and it came out ok. I found that any less than 2mm thickness made the tray weak. If you are going to use this outdoors, I recommend PETG.
The author marked this model as their own original creation.