Silicone nozzle baster brush for voron 2.4

Hello! thanks for checking this out. This is a nozzle brush for anyone using voron tap, beacon contact, a tool changer, or if you just like having a clean nozzle. There are two files, one if you use the kinematic bed mounts, another if you just use the standard bed mounts. Cut the brush bristles to desired length, push the insert into the print, mount it, and you're good to go. 

I'll be adding a macro shortly, just gotta iron out a few things. 

Some nozzles have PTFE coating or some plastic repellant, and brass brushes can harm that coating. For those who use beacon contact and don't want a brass brush near the probe, this is an option for you as well. 

BOM:

1x dollar store silicone basting brush, can be found at Dollarama or here: https://www.instacart.ca/products/25062826-rama-design-silicone-basting-brushes-2-pack-2-ct

1x M3x30 SHCS or BHCS, up to you

1x M3 T nut or hammerhead nut, whatever works

some ABS filament or better, this will be touching a hot bed.