Lenovo Pen Plus magnetic holder

This is a magnetic pen holder sized for the Lenovo Pen Plus and 12x3mm magnets. I printed roughly at 0.30mm layer height, with tree supports, and I was able to press-fit my 12x3mm magnets. Perhaps try 0.15mm for a better finish.

I used the customizer to fit the Lenovo Pen Plus and 12x3mm magnets

codeandmake.com_Pen_Holder_Fridge_Magnet_v1.0.json

{
   "fileFormatVersion": "1",
   "parameterSets": {
       "New set 1": {
           "Magnet_Hole_Depth": "3.1000000000000001",
           "Magnet_Hole_Diameter": "12",
           "Material_Thickness": "2",
           "Pen_Hole_Depth": "60",
           "Pen_Hole_Diameter": "11"
       }
   }
}