TRD and Toyota Tundra Keychain

.stl explanations:

Just TRD Keychain.stl: is the keychain with just the TRD logo on one side

two part TRD Side.stl and two part Tundra Side.stl: This is the keychain split in half so you can get more detail out of the Tundra side or use different colors. You will just have to glue the two halves together when you are done.

Tundra Keychain.stl: The full keychain with both the TRD side and Tundra side together

Printing Recommendations:

The lower the Layer height the better. I printed it out of PETG at .12 layer height. The keychain is only about 40mm across so if you want more detail, increase the size