IKEA GNEDBY shelf lifting pegs / raising pins for Blu-Ray disc compartments

When using the IKEA GNEDBY rack for blu-ray discs and placing the shelves on the pre-punched holes, the bottom compartment will not be high enough to put the cases upright.

Raising the shelf by just a few millimeters with these slim pegs will solve this issue without blocking the corners.

Single pegs may be printed without supports at 0.1 mm layer height.
Be careful when printing multiple pegs at once, the nozzle might knock them off when moving around.

These pegs will raise a shelf by appx. 4 mm.