Magnetic EDH Deck Box

Here is my first custom version of an EDH deck box. Inspiration for the box and the hinge came from the following sources:

• Hinge: https://www.youtube.com/watch?v=KL1aj16ynf4
• Magnetic Lid: https://www.thingiverse.com/thing:59332

The box consists of two parts: the lid and the box itself. The lid closes magnetically and can be completely removed if needed, providing space for counters, dice, or similar items. The dimensions are:

• inner width: 68mm
• inner length: 71mm
• box height: 100mm

The box has an opening that allows the commander to be displayed even with the lid closed.

The magnets can be glued in place after printing. I used the following magnets for this:

• https://www.supermagnete.ch/scheibenmagnete-neodym/scheibenmagnet-8mm-2mm_S-08-02-N
• https://www.supermagnete.ch/stabmagnete-neodym-rund/stabmagnet-4mm-10mm_S-04-10-AN

Printing Tips:

• rotate the lid 180°
• Print with a 0.1mm layer height for the areas where the magnets are placed, and 0.2mm layer height for the rest
• use 0.4 or 0.25mm nozzle