ZeroWater 30 Cup Pitcher Spigot Adapter

A very niche model, but if you own the ZeroWater 30 Cup Pitcher then you know the pain of having to hold down the very stiff button for what feels like an eternity. This model attaches to the spigot and adds a lever you can toggle for hands-free pouring.

Extra parts required:
4x M4 Bolts 30mm long
4x M4 Nuts
2x M3 Bolts between 8mm and 12mm long

Reference Photos for assembly. The M3 bolts should spin freely in the hinge piece but should cut threads into the plastic of the lever piece when assembled. Note that the lever piece has an orientation. The rounded part of the short end should be what makes contact with the button when the lever is in the up position. When the lever is pushed down, the flat side of its short end should be parallel to the button surface.

All files print flat with one support necessary for the hinge piece.