Case for Raspberry Pi 5, upgraded

This is a modular housing for a Raspberry Pi 5
It can be used as a stand-alone housing or optionally on the
housing for a standard SSD 100x70x7 mm. 


The housing is compatible for a Raspberry Pi 5 and the official active fan of the Foundation.
An NVME Hat "Geekworm X1003 PCIe to M.2" also fits in without any problems.

Update
With the lower part “LowerPart_official_nvme_hat” now also suitable for the official NVME hat of the RaspberryPi Foundation

The SD card can be accessed through a recess in the rear section.
The on/off switch can be operated using the pin.

Required material:
8 Screws M2,5 x 6mm

For New Lower part and official RaspberryPi NVME Hat
4 Screws M2,5 x 12mm