jewelry and earrings carousel - manège à bijoux

rotating jewelry and earring merry-go-round mounted on a lazy susan glass bead axial bearing

I've added a cavity in the base to make the whole thing heavier by filling with sand, for example, I used a large stainless steel nut, the bottom cleats are used to create a stop to prevent the assembly from opening up

part 5 has a printing and mounting direction

When fitting, remember to align parts 1 and 2 correctly. Part 2, which is fitted at the very top of the assembly, is fitted with lugs for attaching collars that will hang down the inside of the mast through the aligned holes.

it is necessary to clean the print from its supports at the level of the ball bearing and apply a little grease when mounting.