Parametric GoPro attachments

I have made a parametric mount for GoPro, using it also for other purposes.
you can change the tolerance of:

• plastic
• gaps

• holes
  in Fusion 360 you find those 3 parameters. It was hard but I found the real sizes of Go Pro Mount:

  "General" GoPro slot mount
  Plastic thickness : 3.02 mm
  Gap : 3.12 mm
  Hole : 5.09 mm
  Outer radius : 14.88 mm
  slot depth : 15.66 mm
  hexagon: 9.5mm face2face

  Important:
  some compatible mounts have tighter gaps (at the bottom), so you have just to increase the tolerance of 0.1.
  If you print SLA you can use tolerance =0.0 as the material shrinks a bit under UV, but it is always a trial&error process, once you find what best fits for your printers, just take note of it.
  what you find it is perfect for me and for my CR-10.

  Print Settings

Printer Brand:

Creality

Printer:

CR-10

No

Supports:

No

200

Infill:

25%

Notes:

I suggest outer wall flow: 95%