Enclosure for CaracalDB USB-C Power Supply for N64. All files are made to be printed without supports.
You will need two M3 screws, minimum length of 6mm and maximum of 12mm.
There are two choices for the Bottom STL:
“Bottom M3 Threaded Inserts” requires two M3 Threaded Inserts with an OD of 4.5mm and a length of 3.5mm.
“Bottom NO M3 Threaded Inserts” does not require threaded inserts, M3 screws are threaded directly into the plastic.
The author marked this model as their own original creation.