Designed for the CheapinoV2 (https://github.com/tompi/cheapino)
The design uses six M2x3x3.2(OD)mm brass heat inserts to secure the six M2 screws in place, as well as eight 3M 5x2mm rubber feet.
The models allow for both hot-swap and non hot-swap switches to function with the case. I suggest printing the plate-inserts and base-screws when using a hot-swap board.
The base-inserts can be used for boards with the switches soldered already.
The models are designed for the right side, but can be printed for the left simply by mirroring the model.
The author marked this model as their own original creation.