CR-10S - Bondtech - Mosquito - Noctua - TH3D EZ-ABL - Direct drive mount v2

This is an mount on the CR-10S 3D Printer, to Mount a Bondtech BMG and a Slice Engenering Mosquito Hotend in a direct drive configuration on the CR-10S, as well as a 40x40mm Fan mount for part cooling

Parts are designed in Fustion 360

https://youtu.be/4P0DP0k8bCI Video link for the project

Please note!
Version 2 of the files have been uploaded.

They provide:
New Main mount that allows hotend to be facing the front (for hotend fan mount)
40x40mm fan adapter for Hotend Cooling
2 types of Blower style fan mount - Direct airflow and semi-circular fan duct
3 part Adapter for mosquito hotend to clamp inside the Bondtech extruder.
1 part goes up into the Bondtech, one goes in the small circular hole in the mosquito, and one is the main adapter that screws onto the mosquito

Probe Offsets:

define X_PROBE_OFFSET_FROM_EXTRUDER 40 // X offset: -left +right [of the nozzle]
define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]
define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
define MIN_PROBE_EDGE 20

Print instructions

Print in PETG or other material that can handle more heat than PLA