Guardian Bob

Get ready to defend the system of Mainframe with Guardian Bob!

Hailing from the iconic 90's CGI show Reboot, Bob and his trusty key tool Glitch, are here to mend and defend your 3D prints and printers from malicious viruses. When fully assembled, he stands 32 cm (12.6 inches) tall. There are also 2 full body figure versions of him available in both FDM and SLA format.

Have an alphanumeric time printing!

If you like this model, visit my Facebook page to view my other 3D sculpts and prints, as well as additional pictures: https://www.facebook.com/ScenestruckArt

If there is a problem with the model, please let me know. Constructive feedback is always welcome.

NOTES

• FDM (Ender 3 V2 Neo) and SLA (Creality LD-002R) tested. Files sliced through PrusaSlicer 2.8.0, Cura 5.7.0, and Lychee 6.0.2.
• Glue may be required.
• All separated parts are designed for FDM, but may also work for SLA (scale down files as you see fit). For a proper resin print, use the "Full Body" file as listed.

FDM settings:

Print Temp: 200 C
Bed Temp: 60 C
Layer height:0.12 (hair) - 0.20 mm
Infill: 5 - 10%
Supports: yes
Speed: 40 - 60 mm/s

Filament (all PLA):

Esun: Blue, Light Blue
Creality: Orange, Matte Blue
Sunlu: Black
Flashforge: Silver
Anet: Yellow

SLA settings:

Layer Height: 0.05 mm
Light-Off Delay: 3 sec.
Exposure Time: 11 sec
Lift Distance: 5 mm
Lift Speed: 50 mm/m
Retract Speed: 150 mm/m

Resin: Creality UV Mint Green + Creality UV Sensitive Blue