Hanimandl for Stainless Steel Filling Pot

I really like the Hanimandl design with the gear drive. This remix allows to fit this gear drive onto a stainless steel filling pot. I designed kind of a clamp, so you don't need to drill a hole into the stainless steel plate.

You will need to replace the M8 screw on the left side with one with about 40mm.

Furthermore, I added a new electronics box which fits my needs. It is designed for a Fysetc Mini 12864 Panel, a switch with 3 positions and two push buttons.

I used the same scale as in the original version.

Here are the (non-affiliate) links for the components I used:

https://github.com/FYSETC/FYSETC-Mini-12864-Panel

https://www.amazon.de/dp/B0C2Y46BK6

https://www.amazon.de/dp/B073PX533G

https://www.amazon.de/dp/B07Q65JY1K

https://www.amazon.de/dp/B0C3QH7V8M

https://www.amazon.de/dp/B07GT2HYFJ

Actually, I forgot where I bought my power supply, so unfortunately I can't provide that link …