Magnetic Hygrometer Mount for Bambu Lab P1P, P1S, X1C, X1E

I designed this Mount to put a Hygrometer in the view of the internal camera from my Bambu Lab P1S, so I can see internal Temperature and Humidity of the Printer in the BambuStudio/BambuHandy.

The Hygrometer I used is the standard recktangle one you find on Amazon, eBay or Aliexpress

to secure the Mount you can use doublesided Tape or glue in 8x3mm Magnets in the holes on the bottom.

Just for the ease of use, this is the Product I used and designed the Mount for:

https://www.amazon.de/dp/B0BNPK3WWG?psc=1&ref=ppx_yo2ov_dt_b_product_details

Supports are only needed at the small Triangles on the outside. Tree Supports are recommended.

I printed this piece in PETG.

I lowered the Printspeed for the first Layer for better Bed Adhesion, but it is not strictly nescessary.