Fly Line Spooler 2

Spool holder to facilitate the loading of backing and fly line on a reel. This makes it easier to control the line to get a smooth and flat wind in the reel. It sits on the bottom section of the rod. I printed it with PLA and supports are only necessary in the cross-hole in the body.

There are some good YouTube Videos on how to fasten and load the lines. Here's the one I used:

    https://www.youtube.com/watch?v=J3mKbkMUs1c

Here's another one with some good techniques:

    https://www.youtube.com/watch?v=5Eatd4diw_g

If you like the design, please post your Likes and Makes! Thanks!

1. Replaced ¼-20 Bolt with 3D printed Spindle
2. Streamlined design
3. Removed excess material