BigBricks Wall Mount Iron Man Repulsors

One of our guys on the BigBricks discord came up with very nice repulsor models suitable for BigBricks Lego inspired 6 to 1 of Iron Man.

The repulsor models can be found here:

https://makerworld.com/en/models/504761#profileId-420434

Since I already did different wall mounts for all the other available BigBricks figures, I had to do one for this great model as well, the diameter of the studs is slightly larger than on the regular wall mount.

It works specifically for the optional Repulsor model, but is interchangeable with my R2D2 and regular BigBricks wall mount (you can find that under my models) as it uses the same screw distance.

You can switch this wall mount with the regular and R2D2's wall mount and vice versa in case you want to put your R2D2 or regular to another spot without the need of drilling new holes.

For mounting use 2x 4,5mm Spax screws or similar (5mm hole / 10mm countersunk, 50mm screw distance).

Printed in Prusament PLA Galaxy Black

0,2mm IS Structural

3 perimeters

5 bottom / 5 top layers

15% Grid infill