Open Stick Modular "Mini" Remix

I took the original files and paired them down into as few parts as possible. I set it up to use this kit from EG Starts:

https://www.amazon.com/dp/B076LM9XNM?psc=1&ref=ppx_yo2ov_dt_b_product_details

The top is magnetically held down for easy access. The top and bottom housings are 340mm wide. You will need a 350mm+ bed to print unless you want to cut them in half. The magnets used are 6mm x 2.5mm. The heatset inserts for the main board are m3x5mm. I am using m4x6mm screws toi hold the joystick.

Extended reformat