Gloop! Bottle Helmet

This is an example entry for the Gloop! J.E.Ph.F.  Helmet Contest! 

We have printed our model, but you are NOT required to print for an entry, although we will give printed models more consideration. (Scale models count!)

You should provide at least one screenshot of your design. Ideally in an exploded view to show the pieces/colors needed to assemble your design.

Our model features 3 colors and 5 total parts:

1x Bottle (Brown)
1x Cap (Purple)
3x Identification Ring (White)

We have included our source files. While this is not required, it is helpful if slight modifications are needed. 

The Bottle and the Identification Rings are printable without support. The Cap will need support. In our case, we printed it on a Prusa XL out of PLA using PET-G supports. 

All parts are under 360mm cubed and fit within the Prusa XL build volume.    

This helmet skin is a 6X scaled Gloop! bottle and cap. The helmet file in the original model was used to model the helmet skin.