VEVOR Wireless Attic Lift Remote Control Box Bracket

The bracket attaches to one bolt on the top of the hoist (red) and then using two M6-1.0x1mm bolts the control box (yellow) attaches to the bracket. This will allow the control box to hand off the side of the unit. 

The bracket should be cut from A36 Mild Steel with a thickness of .074" (1.9 MM).

https://www.vevor.com/electric-wire-rope-hoist-c_10453/vevor-electric-hoist-2200-lbs-lifting-capacity-1600w-110v-electric-steel-wire-winch-with-wireless-remote-control-40ft-single-cable-lifting-height-pure-copper-motor-for-garage-warehouse-factory-p_010751256234