Star Trek USS Enterprise NCC - 1701

Update 8-26-2019: I have reprinted the USS in Polyalchemy Elixer Silver PLA As the previous one I printed I gave to my…
608
3290
14
20 k
updated August 28, 2023

Description

PDF

Update 8-26-2019:
I have reprinted the USS in Polyalchemy Elixer Silver PLA
As the previous one I printed I gave to my supervisor
I have also added Printable inlays for the base to make the lettering and emblem pop.

This is my rendition of the Star Trek USS Enterprise NCC - 1701

The model consists of 14 pieces and 3 pieces for the base.
All the parts have a .2mm tolerance between them and should fit together nicely with a semi loose fit. With the exception of the base that only has a .1mm tolerance and should be a snug fit, the base I assembled without using glue.
For all the other pars I used 3DGloop.

Support me on Patreon:
image

Print instructions

The larger you print the more the little details will stand out like the windows in the Mid Hull
The ones in the picture are at 100% scale

All parts are in the best printing orientation in my opinion, and is what I used to print them.
The parts that need support are (from build plate only)

Primary Hull
Second Hull Satellite
Secondary Hull Front
Engine Front Caps (You only need it for the outer ring if you can disable it for the middle I would advise it)

The parts that you may need support for but can probably print without it

Mid Hull

Everything else can be printed without any supports.

Tags



Model origin

The author marked this model as their own original creation.

License