Shaper Origin Gen1 Power Plug IEC Socket

Our Shaper Origin had a broken cable directly above the clamp on the vacuum cleaner connection. Since Shaper Support does not deliver the cable separately, but wants to repair it at great expense after sending in the Shaper Origin, we decided to install an IEC socket. This should make it easier to repair future cable breaks and was really cheap!

Hint: Now we can directly attach the cable to the SO spindle and use it with a BOSCH GKF 600 milling basket as edge milling machine ;)

The installation is relatively easy, see the pictures. I cut the cable at approx. 9cm after the housing. You can use the original screws from cable mount. 

You need in addition:

• 2x Threaded Inserts M3 x 5.7 mm
• 2x M3 x 8 mm Countersunk Screws
• 1x IEC320-C14 Male 3 Pins Screw Mount Inlet AC Power Plug Adapter Connector Socket AC 250V 10A
• 1x IEC320-C13 Right Angle Female 3Pins Power Adapter Inline Plug Connector AC 250V 10A
• 3x Pre-Insulated Electrical Cable Female Terminal Lugs