MK3S+ MMU HGX Extruder Gear Kit

To solve the problem of loading failure when pulling filament from MMU, we made the extruder idler closer by about 0.2mm. Through this, you can use MMU and HGX Extruder without any problems. 

Only compatible with “BiGear_Extruder_motor-plate V4” = “BiGear_Extruder_idler V4”

have also modified some files to prevent problems when printing without support.

• M350 E16 - Set microstepping
• M92 E1124 - Change the E-steps
• M500 - Save

July 6, 2024

sorry. The BiGear_Extruder_idler I originally posted was wrong.

Modified to resolve errors in MMU and extruder and to solve problems when printing without support.