CO2 cylinder stand
This stand is for a 10lbs steel cylinder when it needs to be inverted to fill up smaller CO2 cylinders.
1
16
0
117
updated March 27, 2025
Description
PDFA full cylinder is heavy so use this design at your own risk. I designed it and use it. I used PLA, 0.24, 20% infill. You will need supports. This is a long or very long print depending on your printer. It may work with other cylinders if they have the same shape but again be mindful of the weight and adjust your print settings accordingly.
Tags
Model origin
The author marked this model as their own original creation.
