Hooklength Storage Box

I remixed the original model by @Lucikex_134554 to fit the Bambu Lab P1S 256x256 print bed. 

I also removed the Daiwa logos and changed the hinges to use a piece of filament instead of a nail. 

Magnet holes will fit two stacked 3x3mm magnets or one 3x6mm. Don't mix the magnet size with 6x3mm :) You need thin and tall ones. 

Print settings:

1. Position the model diagonally on the print bed
2. 3 walls
3. 15% infill
4. Change the infill direction from 45deg to 0deg, so the infill is still 45deg relative to the model.

Happy printing!

• Changed the size to fit the Bambu Lab P1S 256x256 print bed\
• Removed Daiwa logos
• Changed hinges to use a piece of filament instead of nail