filament storage pull-out shelf - made ot fit your space!

Filament pull-out storage, a simpel system where you can scale it to fit your need.

 Three pieces in total makes a adaptable system, print two “end” pieces and “mid” pieces as you need - i personally have thee spools per section.

the pieces are connectet by a 16 mm tube/rod - i had an old IKEA GRUNDTAL i salvaged parts from, but wood/pvc/metaltubes can be used.
The rod/tube is held in place by M3x20 for the mid.

The “end” screw have to match the materiale you use, the handle mounst with this screw.

The racks mounts with threaded inserts (M4x8,1) to a pull out shelf rail, i usede this one:

https://www.clasohlson.com/no/Skuffeskinne/p/40-7162?gad_source=1&gclid=Cj0KCQjw7ZO0BhDYARIsAFttkChG2mQEpzTixQxxc2EwEQvxo3pSIA_IWI-F4jXTqf4Rh6v-QD6qM74aAqCkEALw_wcB

to adapt it to your shelf, chose/cut rods in length that fits.