Raspberry Pi Pico W Waveshare Pico-OLED-1.3 Monitor attachment

A monitor attachment for a Waveshare Pico OLED 1.3 + Rasberry Pi Pico W combination. Attached under the monitor using two 3m tissue tape foam pads, one front and one back.

The width of my monitor is approximately 25mm. You may need to edit the onshape design if yours varies significantly (The foam pads give some wiggle room) https://cad.onshape.com/documents/931ceda53f80901a19675557/w/4b677ce5001ff99daf95d764/e/52d05a7768dc9f1ae68a31a1

Prints fine with PLA