Bottlecooler for 0.5l Beck's Bottle with (and without) Metallica-Logo

This is a quite simple allthough totally over-egineered bottlecooler for german 0.5 liter Beck's bottles.

The handle is absolutely unecessary but I thought it looks cool and I wanted to practice my design skills. You can also find a model without the handle.

It has a really snug fit but if the bottle gets stuck I added a little slot to bend the cooler slightly open. With the handle it is much easier to bend. 

Because not everybody is a Metallica-Fan I added blank ones without the logo. 

Printed in PETG, 0.6 Nozzle, 0.36 Layerheight, 5% Infill, 2 outer lines, not supports needed.

I would suggest more outer lines (2+) and less infill (~5%) to save material. Use more Infill if you use PLA for more ruggedness.

It took around 6 hours and 10 minutes to print and about 205g filament on the Creality K1 at 8mm³/s. 

Enjoy and feel free to remix and share but no commercial use is allowed.