French Cleat Sandpaper Disc Organizer
Inspired by DisKeeper, but designed from the ground up to be a bit larger than the small
Uses 2x M2x12mm cup-head self
29
181
0
1122
updated
July 2, 2024
Description
PDFInspired by DisKeeper, but designed from the ground up to be a bit a bit taller and have a more robust french cleat.
125mm (5") and a 150mm (6") holders.
Designed to use 2x (each) M2x12mm self-tapping hex screws to connect the cleats to the holders
Designed to use 4x #6 drywall screws to affix the holder to the wall.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Inspired by DisKeeper by SebastianDruckt, but ultimately designed from the ground up.
- Thicker walls
- A bit taller.
- A bit stronger French cleat
- Separated the cleat from the main body of the disc holder to facilitate easier/cleaner printing. (fastened with 2x M3x12 self tapping hex screws)
- Created a 4x holder that can be screwed to the wall for storage (4x #6 drywall screws)…but you can also take the holders out when in use and hang on a French cleat made from ¾" plywood (23/32" actual thickness)
- Added chamfers and filets
- Removed recessed grit numbers. (I prefer embossed, and set that up in my slicer as needed.)
