Color Swap MLS Teams logo Coasters or Plaques

All the MLS teams as color swap coasters, these are colorful but you can do this without a multicolor printer. PolyTerra recommended, it covers wells. Silks work well too.

These can also be sized up for plaques. be mindful of the Z height, It doesn't need to be much thicker than the coaster size.

Atlanta United FC coaster or plaque
The Five Stripes!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Red till 5.2
Black 5.4 - 5.8
Old Gold or Dk gold 6.0 - 6.4
Gold 6.6 - 7

Austin FC coaster or plaque
The Verde and Black!
Los Verdes!
The Oaks!
El Tree!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Black till 5.4
White 5.4 - 6.0
Green 6.2 - 7

Charlotte FC coaster or plaque
The Crown!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
White till 5.8
Blue 6.0 - 6.4
Black  6.6 - 7

Chicago Fire FC coaster or plaque
The Fire!
The Men in Red!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Blue till 5.2
Red 5.4 - 5.6
Lt Blue 5.8 - 6.4
White 6.4 - 7

FC Cincinnati coaster or plaque
The Orange and Blue!
The Garys!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Black till 5.6
Orange 5.8 - 6.0
Blue 6.2 - 6.4
White 6.6 - 7

Colorado Rapids coaster or plaque
Pids!
Rapids!
Filament changes to achieve the desired result.  Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Grey till 4.8
Blue 5.0 - 5.4
White 5.6 - 6.0
Black 6.2 - 6.4
Red 6.6 - 7

Columbus Crew coaster or plaque
The Crew!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Black till 5.6
Yellow 5.8 - 6.2
White 6.4 - 7

D.C. United FC coaster or plaque
Black and Red!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Red till 5.4
White 5.6 - 6.4
Black 6.6 - 7

FC Dallas coaster or plaque
Cows!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Grey till 5.2
White 5.4 - 6.0
Red 6.2 - 6.4
Blue 6.6 - 7

Houston Dynamo FC coaster or plaque
Orange Crush!
El Naranja!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
White till 5.2
Orange 5.4 - 6.0
Black 6.2 - 7

Sporting Kansas City coaster or plaque
Wizards!
SKC!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Grey till 5.2
White 5.4 - 5.8
Lt Blue 6.0 - 6.4
Dk Blue 6.6 - 7

LA Galaxy coaster or plaque
Galaxy!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
White till 5.0
Grey 5.2
Gold or yellow 5.4 - 5.8
Lt Blue  6.0 -6.4
Dk Blue 6.6 - 7

LAFC coaster or plaque
The Falcons!
The Black and Gold!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Gold or a brownish Gold till 6.4
Black 6.6 - 7

Inter Miami CF coaster or plaque
The Herons!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Pink till 5.6
White 5.8 - 6.4
Black 6.6 - 7

Minnesota United FC coaster or plaque
The Loons!
MNUFC!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
This one is on the large size, it can sized down.
White till 5.2
Red 5.4
Black 5.6-5.8
Blue 6.0 - 6.4
Grey 6.6 -7

CF Montréal coaster or plaque
Le CFM!
L'Impact
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Grey till 5.2
White 5.4 - 6.0
Black 6.2 - 6.4
Blue  6.6 - 7

Nashville SC coaster or plaque
Boys in Gold!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Black till 6.0
Yellow 6.2 - 7

New England Revolution coaster or plaque
The Revs!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Red till 5.8
Blue   6.0 - 6.2
White 6.4 - 7

New York Red Bulls coaster or plaque
The Red Bulls!
Metro!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Blue till 5.0
Yellow 5.2 - 5.6
Red 5.8 - 6.2
White 6.4 - 7

New York City FC coaster or plaque
The Pigeons!
The (Bronx) Blues!
The Boys in Blue!
Cityzens!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Dk Blue till 5.4
Orange 5.6 - 5.8
White 6.0 - 6.4
Lt Blue  6.6 - 7

Orlando City SC coaster or plaque
The Lions!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface. Pic shows the wrong color blue instead of purple, user error.
White till 5.8
Gold 6.0 - 6.4
Purple  6.6 - 7

Philadelphia Union coaster or plaque
The Union!
Zolos!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Blue till 5.8
Gold 6.0 - 6.4
Black 6.6 - 7

Portland Timbers FC coaster or plaque
PTFC!
RCTID!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
White till 5.8
Gold  6 - 6.4
Green 6.6 - 7

Real Salt lake coaster or plaque
RSL!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
White till 5.0
Red 5.2 -5.6
Gold 5.8 - 6.2
Blue 6.4 - 7

San Jose Earthquakes coaster or plaque
Quakes!
The Goonies!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Blue till 5
Red 5.2 - 5.4
Grey 5.6 - 6.0
White 6.2 - 6.4
Black 6.6 - 7

Seattle Sounders FC coaster or plaque

The Sounders!
The Rave Green!
I included a backer on this logo, too pointy at the bottom.
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Green till 5.0
Lt Blue 5.2 - 5.6
Dk Blue 5.8 - 6.2
White 6.4 - 7

St Louis City SC coaster or plaque
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
White till 5.4
Red 5.6 - 6.2
Black 6.4 - 7

Toronto FC coaster or plaque
The Reds!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
Dk Grey till 5.0
Lt Grey 5.2 - 5.8
White 6.0 - 6.4
Red 6.6 - 7

Vancouver Whitecaps FC coaster or plaque
Caps!
Filament changes to achieve the desired result. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque.
I used .3mm width top layer and ironed the topmost surface.
White till 5.2
Orange 5.4 - 6.0
Black 6.2 - 7