One-coin PiggyBank

Based on my Piggy

Check out my Piggy Set (figurines, phone holders, keyrings etc.):
https://www.printables.com/model/163349-piggy-set

And a PiggyBanks Collection:
https://www.printables.com/@C47_3d/collections/1538446

---

**Sizes**
Small: for coins up to 18mm diameter and 2.45mm thickness
Medium: 22,5mm x 2.95mm
Big: 27,5mm x 3.45mm

Tested with all Polish coins (including one special, bigger)
Prepared for all Euro coins + some additional space for even bigger coins
If needed you can resize the models for different coins

Piggy is with internal springs that will hold the coin
First time after a print it may be harder to push the coin in

---

Made for 0.4mm nozzle (spring is 0.8mm thick)

There are some bridges but they are pretty short so it shouldn't be hard to print

Printed with
2 walls
0.1mm layer height (you can also use 0.2)
No infill (but with automatic internal bridges/supports in Prusa Slicer)

---