Tobii Eye Tracker - Vesa Mount

This project could use improvement in the hardware section to make it more accessiable. Plastic printed hinge, tobii Bracklet to be a clip, rather than magnets, etc

Included fusion360 files to make your own mods

Hardware -

Torque Hinge - https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2332490.m570.l1313&_nkw=torgue+hinge&_sacat=0

2x Magnets 8mm by 5mm

M4 Nuts/Bolts

4x M4 10mm to 15mm

4x M4 Nuts

Included some spaces if your monitor vesa mount isn't flush with the back, you only max of 10mm of m4 screw to go into your monitor, some monitors don't have a backplate to stop the bolt. So you need either

4x 20mm m4 bolt > Vesa Mount (2mm)> Bracklet (8mm)> Monitor (10mm)

or

4x 30mm m4 bolt > Vesa Mount (2mm)> Bracklet (8mm)> Spacer (10mm) > Monitor (10mm) 

Printed in PLA, 4 walls, 20% gyroid infill. - Bambu Lab

Inspired by >>> https://www.inclusive.com/uk/rehadapt-eye-gaze-bracket.html