Combi Adapter v1 Housing

This is an enclosure for version 1.0 of TrionicTuning member "johnc" Combi-Adapter
1
3
0
25
updated July 1, 2024

Description

PDF

Summary

Housing for the "Combi Adapter" Can and BDM interface.

This is made for Combi adapter with 3mm vertical LED's.

Housing is put together with 4 m3x25mm screws. I suggest tapping the holes with a m3 tap before assembling.

Diffusors printed in clear material and pressed into the LED tubes from the inside. But it also works pretty good without the diffusors.

Print Settings

  • Rafts:

No

  • Supports:

No

  • Resolution:

0,2mm

  • Infill:

20%

  • Notes:

Diffusors printed with 9999 walls to make the print coaxial and have a nice diffusion effect

Model origin

The user re-uploaded this model. The user is not the original author of the model.

Combi Adapter Housing
by ZIMM_ (thingiverse.com)
 

License