Samsung Galaxy Watch strap tuck

I have designed this strap tuck for the dimensions for my galaxy watch - 46mm.

all of the edges are rounded for better feel. The model was made by me in Fusion 360.

Dimensions:

wall thickness: 2.5mm

inside width: 21mm

outside width: 26mm

inside height: 6mm

outside height: 11mm

Print settings:

I used my bambulab A1:

Material: TPU (will work with PLA/PET-G),

Layer height: 0.2mm,

Infill: 50%; Gyroid,

Nozzle: 0.4mm.

For more information and suggestions you can message me on Discord: @Zvezdan