Automatic Gearbox oil dipstick for Renault VelSatis/Espace IV/Laguna 2/Avantime and others with SU1 Gearbox(Aw5550SN for Renault)

Since this dipstick is easily breakable(and mine broke) I modeled it!

Modeled using SolidWorks. Used photoshop for known dimensions and calculating rest.

Found some of the dimensions in a Russian forum: http://www.club-espace.ru/forums/index.php?/topic/11219-%D0%B0%D0%BA%D0%BF%D0%BF-espace-4-%D1%89%D1%83%D0%BF/&do=findComment&comment=206960  

(many thanks to user cavari24)

Gearbox name: Aisin AW5550SN/AF33(SU1 for Renault) 

WARNING! THIS IS NOT THE DIPSTICK FOUND ON VOLVO CARS OR SUCH! 

I highly recommend printing the stick sideways with supports as its much harder to break.

Vertical model doesnt require any supports(Warning breaks easily!)

Print settings:

Layer height:0.2mm (could be 0.1 too but will be less durable)

Layer width:0.4mm (0.2 would be better but its harder to print)

Support: Yes(tree) for sideways model. None for vertical

Build plate adhesion type: None

Material: Petg/ABS/ASA(anything heat resistant) DO NOT PRINT WITH PLA OR YOU WONT BE ABLE TO TAKE MEASUREMENTS IN 75 DEGREES!

Infill:100%(recommended)

Walls:5

Top/bottom thickness: 1mm

I can model other dipsticks too if you send photos and dimensions of them!