Bed Clip

This is a simple clip i made to stop fussing with all the other designs available. 

its easy:
 

• print the bed clip bottom file. 
• Measure the height/thickness of your bed/glass. 
• print the appropriate bed clip top file.  (if your bed+glass is 6mm, you may want to print the 5mm one, as the 6mm one wont apply much, if any, pressure on the bed.
• make sure the hole is “clean” on both parts
• add an M3 Screw + nut. 

total is 3g and 15min or so for the print.