Randco Boat Cover support

I really, really hate bailing water out of a soggy, cockpit boat cover after a rain. I designed up a couple of blocks that, with the help of 4 72" road markers from the hardware store, creates a tensioned support system for the boat cover. Rain runs right off.

Notes

1. Printed on OPXL5H
2. Blue Polymaker PETG
3. ObXidian .6 nozzle
4. .32 later, speed with 3 perimeters
5. 10% gyroid infill
6. No support required
7. I used clear Gorilla Glue for the rods.