Monitor Stand Spacer

I lost the spacer for my dual monitor stand holder.  I don't have the original brand for this particular monitor stand.  After my move I noticed that the monitor stand would not clamp on to the tube properly.  

Created this spacer with outer diameter of 37mm, and inner diameter of 35.4mm. This worked out to be a difference of 1.6mm or 2 passes with 0.4 mm nozzle.

This was printed in ABS, but suspected any material should work.  Printed in Voron spec 5 top/bottom, 4 wall, and 40% infill, but should not be necessary to go this high.