Parametric LED Channel Table Clamp
Description
PDFFeatures
- Parametric design: Easily adjust the dimensions to fit your specific table thickness.
- Tool-free installation: Simple and secure mounting without screws or adhesive.
- Easy adjustments: Quickly reposition or remove as needed.
- Lots of pre-made sizes: Download a variety of pre-made sizes in both metric and imperial measurements, ensuring a perfect fit for your setup.
- Perfect for LED strips: Ideal for mounting LED channels with LED strips.
If you like what I'm doing, please give it a like 👍 consider joining my club or buying me a coffee! 😃👍
Necessary materials
Assembly
- Cut two strips of silicone each 30 mm long
- Glue the strips on the insides of the part of the clamp that attaches to the table's edge
- Slide it on the LED channel and you're done!
Printing settings
All parts print in the default model orientation without supports in PLA or any other material. You can print it in any layer height as well, as there are no overhangs.
Sizes
There are lots of pre-made STLs you can download for different tabletop thicknesses.
This model was designed to fit LED channels with these measurements:
Feel free to adjust the parameters (see the Parameters section below) or request a different size in the comments!
Parameters
You can modify this design in Fusion 360 (the free version is enough) using parameters to make it fit your needs. Download the Fusion 360 design file (in “Design Files” at the bottom of the downloads), open it, and then you can change the parameters by clicking on Solid → Modify → Change Parameters.
These are the parameters you most likely would want to change:
| Parameter Name | Default value | Description |
|---|---|---|
| silicone_pad_thickness | 1.2 mm | Adjust this to the thickness of your silicone pad. |
| table_thickness | 30 mm | Thickness of the table to clamp it on to. |
| model_channel_thickness | 3 mm | Adjust this to make the LED channel part thinner or thicker. |
| model_clamp_thickness | 3 mm | Adjust this to make the table clamp part thinner or thicker. |
| channel_thickness_tolerance | 0.1 mm | If the printed part doesn't slide over the channel easily, increase this. |
| table_thickness_tolerance | 0.2 mm | If the printed part fits too tightly on your table, increase this. |
| model_length | 30 mm | Length of the clamp. |
| model_table_extension | 50 mm | How much the clamp should extend onto the table |
| fillet_radius | 3 mm | How much the edges should be rounded off. |
Tags
Model origin
The author marked this model as their own original creation.
