HULA for KP3S Pro S1

Approximately 150g of PETG was used.

Recommend using petg. 

No support needed.

BOM

• M3x12mm - 6pcs - Required to fasten to the bottom of kp3s pro s1.
• M5 nut - 10pcs - 6 used for base assembly and 4 used for adapter attachment.
• M5x10mm - 10pcs - 6 used for base assembly and 4 used for adapter attachment.

and HULA printing parts

HULA v1.0 for Prusa Mk3/4 & Prusa Bear by thrutheframe | Download free STL model | Printables.com

 

UPDATE (24.07.03) - TPU feet for input shaper test

UPDATE (24.07.01) - I tried hiding the screw holes on the front.