Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA Default White Transmission Distance: 5
PLA Overture Blue Transmission Distance: 1.6
PLA Gray Transmission Distance: 3
PLA Overture Red Transmission Distance: 4.8
PLA Gray Transmission Distance: 3
PLA JAYO White Transmission Distance: 6
PLA Gold Transmission Distance: 16
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to White
At layer #8 (0.72mm) swap to Blue
At layer #9 (0.8mm) swap to Gray
At layer #12 (1.04mm) swap to Red
At layer #13 (1.12mm) swap to Gray
At layer #18 (1.52mm) swap to White
At layer #24 (2mm) swap to Gold Krugerrand for the rest.
The author marked this model as their own original creation.