A comfort grip (for when the device is opened/in play) and a standing case (for when the clamshell is closed) for the iconic Anbernic RG35XX SP.
It has access to all the ports on the side and bottom of the device.
It can be printed with as little in-fill as 5% to minimise weight. I printed it with 15%, and it's still very light. No support is required because the two big grips handle the bulk of the weight.
If you are worried about scratching the device, you can print using a softer material (TPU) or do what I did in one of the images, putting some layers of masking tapes over the contact points.
-
It comes in two versions, one with the iconic GBA SP logo at the front and one without.
No commercial usage; contact me if you would like to sell this commercially.
The author marked this model as their own original creation.