shark hueforge

hueforged shark attack

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

The Model is 130x130mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Basic Beige Transmission Distance: 8

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Blue

At layer #11 (0.96mm) swap to Beige

At layer #20 (1.68mm) swap to Jade White for the rest.