Sadness - Inside Out - Hueforge

Project: Sadness.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 147.06x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Ziro Dark  Grey Transmission Distance: 0.6
PLA Basico Control3D Blue Transmission Distance: 3.2
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA Basico Control3D White Transmission Distance: 1.2
This print uses 4 unique filaments

Swap Instructions:
Start with Dark  Grey
At layer #8 (0.72mm) swap to Blue
At layer #13 (1.12mm) swap to Ice Blue
At layer #17 (1.44mm) swap to White for the rest.