Grenade Carp Fishing Bait Cage Mould

Background:

Inspired by the likes of the classic “mielie bomb” used when fishing, especially for carp, I wanted to design a funky mould.

I decided to work around the shape of a grenade model I saw:  Grenade MK2 WW2

Design:

The design consists of a split mould, identical in shape to allow for easier printing and/or replacement (if need be).

The hinge requires two parts to work, and these can be printed in under 5 minutes.

The opposing side can lock the mould using the same hinge mechanism if required.

You will require a minimum of 2X M3x16 screws and 2X M3 Nuts (4X if you hinge both sides).

I added a countersunk hole on the side of the mould to allow for flavour to be poured in if required.

Print Settings:

• Resolution: 0.16mm
• Infill: 25-30%
• Material: Any
• Supports: Everywhere

(Print orientation included)